45 Degree Offset Optic Mount Base + Top Plate

The OuterImpact 45 degree offset optic mount is able to accept 3 separate tops. Using the tops available, it is compatible with all of the Red Dots Optics (31) our current M.R.A. adapters accommodate, the optics using the Aimpoint Micro Standard (38), and also the Trijicon MRO Standard (3) footprints. The mount only takes a couple of minutes to install on any Picatinny Rail type. The 45 degree offset optic mount is:

• ambidextrous
• low-profile
• lightweight
• steel reinforced
• snag-less design
• retains cheek weld
• designed to co-witness with Magpul Pro Back Up Offset Sights
• ideal for close-range shooting
• an extremely stable platform for your optic
• precision machined
• Made in the U.S.A.

The 45 Degree Offset Optic Mount is made of billet 7075 aircraft aluminum and is hard coat anodized. The 45 Degree Offset Optic Mount attaches to the rail using a steel dowel reinforced clamp. All mounting hardware is included with the exception of the Aimpoint Micro optics. The OEM optic screws must be utilized.

You are able to purchase all of the components separately.

Thank you for your interest in our products. Check out our FAQ for answers to common questions and feel free to contact us at [email protected].

MRA Compatible Red Dot Sights (Mounting Screws INCLUDED):

• Trijicon RMR/SRO – some weapons may experience ejection issues using the SRO
• Docter
• Insight MRDS
• Eotech MRDS
• Leupold Delta Point
• Leupold Delta Point Pro
• Vortex Razor
• Vortex Viper
• Vortex Venom
• Vortex Defender CCW
• Burris Fast Fire 2 & 3 & 4
• CMORE RTS & STS
• Shield RMS – requires a purchase of these screws
• Holosun 507 ”C”/407 ”C” V1 versions – requires a purchase of 6-40 Screws For Holosun V1 Red Dot
• Holosun 507 ”C”/407 ”C” V2 and X2 versions – screws included in OuterImpact Screw Pack
• Holosun 507 ”K”/407 ”K” models require the Micro adapter. Micro adapters are not available for all firearms
• Holosun 508 ”T”
• UTG Reflex Micro Dot
• TruGlo Tru-Tec
• Sig Romeo 3, Romeo 3 Max, Romeo 3 XL
• Crimson Trace CTS-1250 & CTS-1550
• Springfield Hex Dragonfly – must also use OEM provided spacer plate
• Bushnell RXS-100 and 250
• Kahles Helia RD
• Creative XP Glass Eagle – requires a purchase of M3–0.5 x 10MM screws
• Noblex NV G
• SOUSA DARC Micro – requires a purchase of M4 x 8mm Socket Head screws
• Sightmark – Mini Shot

Aimpoint Micro Compatible Red Dot Sights (OEM Optic Mounting Screws Required):

• Actus Core-1 1×20
• Actus Core-2 1×20
• Aimpoint  CompM5
• Aimpoint  Duty RDS
• Aimpoint CompM5b
• Aimpoint Micro H-1
• Aimpoint Micro H-2
• Aimpoint  Micro T-1
• Aimpoint Micro T-2
• Athlon Midas TSR2
• Blaser RD 17
• Burris Fastfire RD
• DI Optical SP1
• Holosun 403 models
• Holosun 503 models
• Holosun 515 models
• Holosun 530 models
• Kahles Helia RD-C
• MAKdot S 1×20
• Minox RV1
• Primary Arms SLX Advanced Rotary Knob
• Primary Arms SLX MD-20
• Sightmark Element Mini Solar
• Sightmark Wolverine 1×23 CSR
• Sightmark Wolverine 1×28 FSR
• Sig Sauer Romeo4
• Sig Sauer Romeo5
• Sig Sauer Romeo-MSR
• Swampfox Liberator 1×22
• Vector Optics Centurion 1×20
• Vector Optics Maverick 1×22
• Vector Optics Maverick 1×22 Gen II
• Vector Optics Scrapper 1×22
• Vector Optics Scrapper 1×25
• Vortex Crossfire
• Vortex Sparc AR
• Vortex Sparc Solar
• ZeroTech Thrive

MRO Compatible Red Dot Sights (Mounting Screws INCLUDED):

• Trijicon MRO
• Trijicon MRO Patrol
• Burris RT-1X

Specifications:

Compatible Guns:

• Any firearm with a Picatinny rail

Mounting Hardware (including 3 tops):

• (1) Foundation
• (1) Clamp
• (2) Steel Dowels
• (1) 6-32 x .5 Torx Head Cap Screw
• (1) M3 x 8mm Socket Head Cap Screws
• (2) 6-48 Weaver T-10 Torx Head Screws
• (2) Sight alignment pins
• (2) M3 x 8mm Flat Head Screws
• (2) M3 x 9mm Flat Head Screws
• (4) M3 x 6mm Torx Flat Head Screws
• (2) M3 x 6mm Socket Head Cap Screws
• (2) 6-40 Flat Head Screws – RMR
• (2) M4 X 10mm Rounded Head Screws

Required Installation Tools:

• Torque Driver
• Extended shank T-10 Bit
• Extended shank T-15 Bit

Please follow mounting instructions included with the optic.

Material: Billet 7075-T6 aluminum. Dowel pins are made of hardened steel.
Finish: Black Anodize
Coating: Anodize
Dimensions: Height (with MRA Top) – .888″ Length (with MRA Top) – 2.03″ Width (with MRA Top)- 2.30″
Additional Tools: T-15 Torx driver, T-10 Torx driver (not included). Why is my tool NOT included? Click Here
Purchase Tool

US Patent: US D851,196 S

Installation Instructions:

Red Dot Pattern Mounting Instructions